MAKFELT is a bitumen-treated hessian-base waterproofing felt conforming to IS 1322-1993. It consists of a continuous hessian sheet uniformly treated with bitumen and finished with mineral powder to prevent sticking between layers and provide additional surface protection.
MAKFELT is designed to be used as part of a built-up bituminous waterproofing system, with bitumen layers applied above and below the felt.
MAKFELT is specified as a Hessian Base Bitumen Felt conforming to IS 1322-1993.
Designed for use between bitumen layers, creating a built-up waterproofing system.
The TDS specifies breaking strength of 135 kg warp-wise and 90 kg weft-wise, along with requirements for pliability, heat resistance, storage sticking and pressure-heat performance.
Makphalt manufactures a wide range of construction chemicals including waterproofing systems, PU & acrylic coatings, cementitious products, bitumen membranes, road repair compounds, anticorrosive coatings, sealants, flooring systems, and concrete repair solutions.
Yes. All Makphalt products are formulated and tested specifically for Indian weather conditions, including high temperatures, heavy rainfall, humidity, and harsh industrial environments.
Yes. Makphalt products conform to relevant IS standards, project specifications, and industry best practices. Product-specific compliance details are mentioned in the Technical Data Sheet (TDS).
Makphalt products are suitable for:
Roofs, terraces & basements
Water tanks & swimming pools
Power plants & industrial structures
Roads & pavements
Foundations & underground structures
Commercial, residential & infrastructure projects
Yes. Each product comes with a Technical Data Sheet (TDS) and application guidelines. Method statements and project-specific technical support can also be provided on request.
Absolutely. Proper surface preparation is critical for performance and durability. The surface must be clean, sound, free from dust, oil, grease, and loose particles as mentioned in the TDS.
Yes. Makphalt products can be applied by trained applicators. We also provide hands-on training, site demonstrations, and supervision wherever required.
Warranty terms depend on the product type, system configuration, and application method. System-based warranties (including 5–10 years) can be offered for selected projects when applied as per guidelines.
Shelf life varies by product and is clearly mentioned on the packaging and TDS. Typically, it ranges from 6 months to 12 months when stored in original sealed packaging under recommended conditions.
Products should be stored in a cool, dry place, away from direct sunlight and moisture, as per storage instructions mentioned on the label and TDS.
Many Makphalt products are water-based, low VOC, and eco-friendly, suitable for green building projects. Certifications and sustainability details can be shared for specific products.
Yes. Our technical team can recommend the most suitable product or system based on site condition, usage, exposure, and budget.
Some products require primers while others do not. Primer requirements are clearly mentioned in the TDS for each product.
You can contact our sales team or authorized distributors. Pricing depends on product type, quantity, location, and project requirements.
Yes. Makphalt provides on-site technical assistance, application guidance, training, and inspections for major projects.
MAK POLYPLAST SUPERLAY MINERAL FINISH is a five-layer polymeric waterproofing membrane featuring a 160 GSM non-woven polyester mat as its central reinforcement. SBS/APP polymer-modified bitumen is provided on both sides of the reinforcement to deliver high softening point, heat resistance and waterproofing performance.
The membrane incorporates a thermofusible high-molecular HDPE film on one side and UV-resistant mineral granules on the other side. Its polymeric construction provides 60% elongation and high tensile strength to accommodate structural movement and adapt to different contours.
MAK POLYPLAST SUPERLAY ULTRA is a high-performance SBS-modified elastomeric bituminous waterproofing membrane reinforced with a heavy-duty non-woven polyester and additional protective fleece layer.
The membrane features an engineered mineral crystal finish on the upper surface and a heat-activatable thermofusible film on the underside. It is designed to develop a continuous and uniform bond with freshly poured structural concrete, providing resistance against hydrostatic pressure and mechanical stresses.
Special selvedge technology enables secure side-lap welding using torch application or hot-air welding.
MAK POLYPLAST BRIDGE SEAL AS is a high-performance, APP-modified, mineral-finished bituminous waterproofing membrane reinforced with a 160 GSM spun-bonded polyester mat. Specially designed for heavy-duty applications, it provides high tensile and puncture resistance along with excellent resistance to thermal shock.
The membrane is specifically developed for bridge decks, viaducts and ramps, and is designed to withstand the high temperatures associated with paving asphalt. It forms a protective waterproofing layer that helps prevent the ingress of water, de-icing salts and aggressive chemicals into concrete structures.
MAK POLYPLAST SUPERIOR is a polymeric waterproofing membrane featuring a 100-micron high-molecular HDPE film centre core with APP polymer-modified bitumen on both sides. The membrane is designed with high elongation and flexibility to accommodate structural movements and adapt to different contours.
It is available in 2 mm, 3 mm and 4 mm thicknesses, with corresponding weights of 3.0, 4.0 and 5.0 kg/m².
MAK SUPER SHIELD TPO is a high-performance, heat-weldable thermoplastic polyolefin (TPO) waterproofing membrane available in 1.2 mm and 1.5 mm thicknesses. It is designed for roof waterproofing and heat-reflective protection in both new and existing structures.
The membrane features a white textured heat-reflective top layer and grey bottom layer, providing long-term protection against water ingress and extreme weather conditions while maintaining flexibility and structural integrity.
MAK ELASTOTHANE ALP 111 is a single-component waterproofing coating based on aliphatic polyurethane technology. After curing, it forms a seamless, highly flexible and durable waterproof membrane with excellent crack-bridging performance.
We usually respond in less than 30 minutes
