TWO COMPONENT BASED EPOXY TILE GROUT
INSTA BOND EP is a 2-part, high performance, chemical resistant epoxy grout for internal and external applications. It is non sag, non shrink, easy to apply, easy clean up and is color consistent. It is stain resistant, impermeable, and has high temperature resistance.
INSTA BOND EP offers maximum protection against staining, and chemical attack from food, beverages, chemicals and cleaning detergents. It is suitable for prolonged contact with water in fully immersed applications in pools and spas.
INSTA BOND EP is available in a range of designer colors, suited for areas that require a decorative chemical resistant colored grout.
Packing: INSTA BOND EP is available in 1.5 Kg and 5 Kg Packs.
Storage: Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
Features
- Low shrinkage
- Can be used in exterior and interior application.
- Easy mixing and application
- Color consistent and stain resistant.
- Non sag in vertical application.
- High strength and abrasion resistant
- Available in over 10 shades
MIXING INSTRUCTIONS
- Empty part A and part B into the bucket supplied and mix thoroughly.
- Use within 45 minutes.
- Do not mix part portions.
APPLICATION
- The epoxy chemical reaction is highly dependent upon the ambient temperature. High temperatures will significantly speed up the reaction and reduce the pot life. Do not work with the product if the ambient temperature is lower than 10°C or higher than 30°C.
- Apply INSTA BOND EP liberally to the surface and work into the joints with a grout squeegee taking care to completely fill the joint.
- Remove excess grout and level the surface by moving the grout squeegee diagonally across the Joints while the mix is still fresh.
- Within 20 min., remove the excess grout residue from the tiles with a damp (but not wet) sponge. Rinse the sponge frequently to achieve the best results.
- Do not allow the epoxy grout to fully cure before cleaning. Difficult to clean deposits can be removed with lacquer thinners.
