TWO COMPONENT HIGHLY FLEXIBLE CEMENTITIOUS WATER PROOFING.
MAK Crete 2K is a pre – packed two component polymer modified cementitious coating, which can be easily mixed on site to form a smooth slurry then applied with brush or roller. This coating cures to form elastomeric waterproofing membrane with excellent adhesion to cementitious surfaces. This should be applied onto damp substrates, internal and external wet areas. The cured membrane is flexible, durable, weather-resistant to most substrates.
Application Areas: MAK Crete 2K is best suitable for the waterproofing of water retaining structures like potable water tanks, reservoirs, canals, culverts, etc. It is suitable for use in foundations, basements, sunken areas, terraces, parking deck and sealing pre-cast joint.
Packaging: 5L + 8 kg pack .
Primary Uses:
MAK Crete 2K is best suitable for the waterproofing of water retaining structures like potable water tanks, reservoirs, canals, culverts, etc. It is suitable for use in foundations, basements, sunken areas, terraces, parking deck and sealing pre-cast joint. It can also be used to treat efflorescence.
Consumption: Approximately. 8-10 sq. mt / 2 coats of [5 L + 8 kg] Pack.
Advantages
- Withstands high positive hydrostatic pressure and negative pressure.
- Excellent crack bridging capacity
- Excellent bonding to substrate such as concrete, masonry, etc.
- Good bonding to damp surfaces.
- Food Grade – Can be used for treatment in potable water tanks.
- Breathable
- Able to take foot traffic when cured.
- Non-toxic
- Direct plaster or screed without affecting bond.
Directions For Use
- The surface to be coated, should be free from all loose particles, dust, oil and laitance. All visible cracks should be opened in ‘V’ grove and filled with MAK Sealing Compound, a single component crack filling compound.
- Mak Crete 2K comes in a pre- packed 2 component system which include 5L liquid and 8 Kg powder. Mix both the components in a clean container using a power drill or manual mixer.
- Minimum 2 coats are advised of the mix at a consumption rate of 1.3 to 1.5 Kg per sqm/ 2 coats.
