ACRYLIC MULTIPURPOSE WATERPROOFING POLYMER
Mak Crete MWP is an acrylic based polymer modified cementitious water proofing system. The Mak Crete MWP polymer, when mixed with cement will provide the unique solution to all problems related to water leakage and protects from severe fungus, salt penetration, or environmental attack
- Bathroom and any floor to dampness
- Water Tanks or swimming pools
- General concrete repair
- Basements, Retaining Walls, tunnels, etc.
- Against corrosion and salt attacks
- Roof Slab, Parapet, Terrace, Balconies.
How It Works
It is well accepted fact that the damage skin or flesh of human body is only replaced with the skin or flesh of similar body. Likewise, damaged cementitious concrete or mortar should always be replaced by same kind of material. But cement particularly is having poor adhesive properties, low flexural and impact strength and mainly thin section fragility. Addition of acrylic polymer Mak Crete MWP into cement acts as a bonding agent and forms a hard, impermeable film which prevents not only water and fume but also allow the structure to breathe. This film, unlike all other existing conventional materials is flexible enough to take care of the thermal movement of structure and protects from severe attacks during all seasoned to avoid lifting of the coating. Packaging: 1kg,5kg, 20kg.Features
- Mak Crete MWP increases the plasticity of concrete and cement.
- Provides a tough and hard surface with water proofing.
- Resistant to salt penetration
- Resistant to UV rays, mild acids to strong alkalis.
- Non-Flammable.
- No health hazards to workmen.
- Can be applied on horizontal as well as vertical surfaces.
Typical Properties
- Base: Emulsified Acrylic polymer
- Appearance: White, Milky Liquid dries to colourless coating
- Shelf Life: One year if unopened and stored properly.
- Toxicity: Non toxic but avoid inhalation
- Solid contents: >30%
- Packing: 1 kg, 20 kg and 200 kg containers.
