Water based White PU waterproofing coating
MAK ELASTOTHANE EMW-WB is high performance water proofer that dries to form a tough impermeable coating.
It is a single component, long lasting, permanently elastic, polyurethane dispersion in water that may be applied during various seasons and weather conditions.
- Excellent crack bridging capacity. Highly flexible.
- Excellent bonding to substrate such as concrete, masonry, wood, metal, plastic, etc.
- Very good bonding to damp surfaces.
- Provides a key to plaster on difficult surfaces.
- Easy to use.
Application Area:
- Trafficable roofs (light traffic) Useful on concrete and brick foundations.
- retaining walls and bridge abutments.
- For protection of Interior and exterior walls.
- Can be used as adhesive to bond wood blocks.
- expanded polystyrene and cork tiles to any surface.
- Tin sheds, Asbestos sheets waterproofing.
Primary Applications
- As an impervious waterproofing membrane
- Useful on concrete and brick foundations, retaining walls and bridge abutments.
- For protection of Interior and exterior walls.
- Can be used as adhesive to bond wood blocks, expanded polystyrene and cork tiles to any surface.
- Trafficable roofs (light traffic)
- Tin sheds, Asbestos sheets waterproofing
Directions for Use
- The surface to be coated should be free from all loose particles, dust, oil and laitance. All visible cracks should be opened in ‘V’ grove and filled with repair mortar
- The primer coat is applied by diluting MAL ELASTOTHANE EMW-WB with 50% water
- MAK ELASTOTHANE EMW-WB is applied in min. 2 coat application. 10-15% dilution with water is recommended to make the material brushable. Minimum 4-6 hours gap should be given between coats for drying.
- Reinforce the layers with 40-45 gsm fiber glass or nonwoven polyester cloth for additional strength
